Does my bobbin thread need to match?

Does the bobbin have to match the thread?

Because the bobbin thread should never show in machine embroidery, it’s never necessary to match the color of it to the top thread or the area of the embroidery design you are stitching. … You can wind a lot of bobbin thread on one bobbin – much more so than with regular thread.

Why is my bobbin thread uneven?

If the correct spool cap is not being used the thread will become tangled on the spool and cause the spool of thread to jump around and hang the thread. NOTE: If the thread gets caught or tangled while trying to wind the bobbin, the bobbin could be wound unevenly. … Verify that the bobbin winding thread path is correct.

Is bobbin thread different than top thread?

The bobbin thread can be a lighter weight than the top thread and still provide sufficient strength without adding bulk. Using a cotton top thread with a poly bobbin thread is fine.

Does it matter what color thread is on the bobbin?

You can use whatever color you want, but you don’t need to change color to match the top thread. Your bobbin thread should not show through the top layer of stitching. … You will always want to use a lightweight polyester bobbin thread, such as BobbinFil or any other 60-70 weight thread.

THIS IS FUNNING:  You asked: How often should I have my embroidery machine serviced?

What color should my bobbin thread be?

Usually when you thread your machine you use the same color for the top spool as you do for the bobbin. This is fine when the fabrics you are sewing together are the same or when the underside of your project will never be visible.

What happens if you use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

What is the purpose of bobbin thread?

In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.