What settings should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
What is the standard settings for a Singer sewing machine?
Set the machine for straight stitch, with a stitch length of 3 to 3.5mm. Use a SINGER Topstitching Needle, size 90/14 for medium weight fabrics, or a SINGER Topstitching needle, size 100/16 for heavier fabrics. Sew 1/4″ – 3/8″ from the edge of the fabric.
What is normal stitch length and width?
What stitch length should I use?
|What is the best stitch for:||Suggested Stitch Length (mm)||Stitches Per Inch|
|Standard Stitch Length||2.5 – 3.0||8 – 10|
|Basting stitch||5.0 – 7.0||4 – 5|
|Stay-stitching||1.5 – 2.0||12 – 8|
|Top-stitching – light/medium weight||3.0 – 3.5||7 – 8|
What is the standard setting for the stitch width?
You don’t need to worry about the stitch width when sewing straight stitches — just set it to 0 (zero). All machines measure the stitch width in millimeters (mm). Some makes and models have a maximum stitch width of 4 to 6 mm.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
What is the tension setting on cotton?
Cotton requires a moderate tension setting, usually between three and four.