Why is my bobbin thread wavy?

Why is my bobbin thread bunching underneath?

What should I do if I experience thread bunching? As “thread bunching” occurs on the underside of the fabric, some people think it is due to the lower thread. They check whether the bobbin is sitting correctly in the bobbin case or even replace the bobbin. … On many models, the upper thread tension is set automatically.

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.

Why does my bottom thread keep jamming?

The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.

Why does my top stitch look wrong?

Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.

THIS IS FUNNING:  What do you put on a wound after stitches are removed?

Why does my thread keep coming out of needle?

The upper thread was not threaded correctly. The spool is not installed correctly, the spool cap is too big for the spool being used, or the thread has come out of the needle bar thread guide. Rethread ensuring that the spool is installed correctly and using a spool cap that matches your spool size.