What tension should I use for a straight stitch?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What causes uneven stitches on sewing machine?
The Problem: Stitches are coming out uneven or skipping entirely. THE SOLUTION: Odds are, the secret culprit here is a needle that is broken, bent, or otherwise damaged. Experts recommend that you replace your needles for every 16 hours of stitching time.
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
What settings should I have my sewing machine on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
What to do when sewing machine is not sewing?
Machine is not sewing any stitches while trying to sew
- The machines top thread may not be threaded correctly. …
- Make sure the needle thread is behind the needle bar thread guide on the needle bar.
- The thread may be knotted or tangled. …
- The thread may be too thick for the needle.
Why won’t my sewing machine needle go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. … If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt. Replace the drive belt if it’s broken.
Why does my top stitch look wrong?
Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.