How do I attach lining to curtains?
Lay the lining on the curtain, wrong sides together. Overlap the top edge of the lining and the bottom edge of the curtain facing by 1/8 inch. Overlap the side seams at the outside seams 1/8 inch. Pin the lining in place across the top of the lining.
Which side of blackout lining faces out?
While the lining will keep the light out of the room regardless of how it is positioned, some manufacturers recommend aligning it so the textile side faces the window, simply to reduce sun exposure to the specialty coating and to help prevent it from damage from rubbing against the window frame while the curtains are …
How do you join blackout lining?
One of the easiest ways to join your blackout lining to your curtains is with the help of something called fusible hemming web. This can be used for joining two fabrics together. Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded.
How do you attach lining to sheer curtains?
Sewing the lining and curtain fabrics together at the curtain’s top, which will allow the sheer fabric some movement. Lay the sheer fabric panel flat with the lining fabric on top, front facing down. Sew along the top edge, 1/4 inch from the edge. Fold this edge 1/4 inch onto the wrong side of the lining fabric.
Do you cut off selvage when making curtains?
It depends on the fabric as some selvedges are tighter than others. In the grand scheme of things when you are making curtains the time taken to trim off the selvedges is not that much, but unless the selvedges look very tight I do tend to leave them on.
Do you need to hem blackout lining?
If You’re Using The Blackout Fabric As A Curtain Lining
With Blackout fabric linings the hems should be as short as possible 1-2cm on all four sides, this will enable the curtains and the blackout lining to work much better at blocking out the light.
What is 3 pass blackout lining?
A three pass lining means that a layer of white foam is applied to the back of the curtain fabric, then a black one, followed by another layer of white. The white layers mean that the black colour doesn’t disrupt the decorative finish of the fabric while the black layer blocks light and retains heat.
Is blackout lining washable?
Helps for insulation as it has good thermal properties. This blackout lining is also washable at 30 degrees, but should be dried flat to ensure the blackout coating stays intact.
Can blackout lining be ironed?
You never want to iron the insulation side of your blackout curtains as the material will rapidly melt. This could not only damage your curtains but could damage your iron as well. However, thanks to aluminium foil placed beneath, ironing the fabric side of your curtains should be enough to remove wrinkles and creases.