How do you adjust the tension on an Elna Overlocker?

Why is my overlocker not sewing?

When you overlocker is not stitching right, it could be that the blades need changing. … If this threading is wrong, then your overlocker will not form a chain or even a stitch. After that, check your tension settings when you start threading the machine. If they are not already set to 0 do so before threading.

Why are my Serged seams wavy?

In my experience, the dreaded wavy seam is most often a result of serging more than two layers of fabric together like when attaching cuffs, waistbands, and neckbands.

Why is my thread bunching underneath?

A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.

What is the tension setting on cotton?

Cotton requires a moderate tension setting, usually between three and four.

What stitch length and tension should I use?

What stitch length should I use?

What is the best stitch for: Suggested Stitch Length (mm) Stitches Per Inch
Standard Stitch Length 2.5 – 3.0 8 – 10
Basting stitch 5.0 – 7.0 4 – 5
Stay-stitching 1.5 – 2.0 12 – 8
Top-stitching – light/medium weight 3.0 – 3.5 7 – 8
THIS IS FUNNING:  What happens if I use smaller knitting needles?

Why is my bottom stitch not straight?

If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.