When should I lower my dogs food on a sewing machine?
When you set up for free motion quilting, you lower or cover the feed dogs so that they are out of the way. They aren’t needed because YOU are in total control of moving the quilt sandwich under the needle of the machine. You create the stitch length by how fast or slow you run the machine and move the quilt.
Can you use a sewing machine without feed dogs?
For the most part the answer is no. Some types of sewing machine function (darning, quilting, thick fabrics, thread painting-embroidery) need the feed dogs down, but for the most part, sewing a seam requires functioning feed dogs to move the fabric through the machine at the right timing to create a proper lock-stitch.
What lowers and raises the feed dog?
The feed dog position switch is located on the rear of the machine on the base. – Make sure that the needle is in its highest position. – Slide the drop feed lever to the left (as seen from the rear of the machine) and turn the hand wheel one complete turn to raise the feed dogs.
Should feed dogs be up or down when quilting?
Feed dogs are meant to be up and engaged so you can sew evenly spaced stitches. This is the way the machine is designed to be used!
Why are my feed dogs not working?
If the feed dogs are not coming up to move the fabric, check to see if there is a setting that has lowered the feed dogs; if so, return them to their proper setting. If there is no such setting on your machine, take off the throat plate and clean out all dust, thread, and lint.
What is a dog feed on a sewing machine?
Feed dogs are the little metal teeth that are found inside of your sewing machine’s needle plate. The purpose of the feed dogs is to grab your fabric and feed it through the sewing machine so that you can focus on all of your other sewing needs.