Best answer: What should the tension be when sewing elastic?

How do you sew elastic tension?

Sewing elastic fabrics on regular sewing machine – 4 steps to success (sewing knits)

  1. Step 1 – Choose the right needle.
  2. Step 2 – Make seams elastic.
  3. Step 3 – Adjust lower thread (bobbin) tension.
  4. Step 4 – Reduce the foot pressure.
  5. Step 5 – Walking foot (bonus step)

Why can’t I sew through elastic?

The most common mistake is that you need to adjust the seam allowance to sew elastic. In addition, you need to adjust the lower thread bobbin tension, reduce the foot pressure, and using incorrect the pressure foot instead of a walking foot can cause elastic to not sew well on the garment.

Can a sewing machine sew through elastic?

Some fabric types require a different needle to use in the sewing machine. Elastic, a material that can stretch also needs a specific needle to go through its fabric. … This needle type makes it ideal for sewing elastic and other stretch fabrics. Using a stretch needle helps you avoid the problem of birdnesting.

Why does the thread bunch up when sewing elastic?

When sewing, the top, and bottom stitches should interlock smoothly and look the same. However, if the stitches are puckered, the seam is unstable, the thread bunches up, or the stitches are just plain ugly, then there is most likely a problem with incorrect tension on either the top or bottom.

THIS IS FUNNING:  Does my Husqvarna sewing machine need oil?

How much elastic should you use?

A correct fit of elastic for the waist means obtaining a good measurement of the natural waist or wherever the finished garment is to sit on the torso. Between 2 to 4 inches are deducted from this measurement to make up the elastic length. If a tighter fit is preferred, deduct 4 inches or more from the measurement.

Why is my elastic wavy?

Elastic goes wavy when it’s naturally being distorted by the pull of the garment. … Ways to solve this is either to change the fabric, change the elastic so instead of doing zig zag where by it goes through the machine twice, apply 3-step which only goes through the machine once.

How do you calculate elastic for a fitted sheet?

How much elastic do I use to make a fitted sheet stay on the bed? Fitted sheets have elastic either in the corner areas only, or around the entire sheet perimeter. The general ratio is to cut elastic about 1/2 to 2/3 of the distance it’s being applied to, depending on the stretch of the elastic.